The Ford Fusion is a well-known car for its smooth drive but some drivers may face a problem called Power Steering Assist Fault. This problem appears when the power steering system which helps to steer your car effortlessly fails. This fault may cause drivers to experience more difficulties in turning the steering wheel. This issue should be tackled as soon as possible because driving with a power steering assist fault makes the vehicle harder to control.
In this article, we will tell you the Ford Fusion Power Steering Assist Fault and how to fix it whether you have a Ford Focus, Ford Taurus, or Ford Escape.
What Does Ford Fusion Power Steering Assist Mean?
The phrase Ford Fusion Power Steering Assist is used to describe a feature in the car Ford Fusion that assists the driver in steering. It is like having an assistant that reduces the physical effort needed to control the car, especially during slow movements or when parking.
But in some cases, the power steering assist system may fail, and this condition is referred to as Power Steering Assist Fault which means that the mechanism that provides that additional help in steering is faulty.
5 Causes of Ford Fusion Power Steering Assist Fault
1. Electrical Issues
Electrical issues are one of the common causes of the Power Steering Assist Fault in a Ford Fusion. The electrical components that are used in the power steering system the sensors and wiring are very much essential. In case of malfunction of these elements, it may affect the functionality of the system. In such a case, if the power steering has a bad connection or a broken wire, it may lose its assistance, and it would be quite difficult to steer the car.
In case of such electrical problems, the onboard computer of the vehicle often detects the problem, and a warning message is displayed, telling that service is needed. Thus, listening to the notification regarding the service required is important, which ensures timely inspections and repairs to avoid the development of additional problems.
2. Fluid Leaks
Another possible cause of the Power Steering Assist Fault in a Ford Fusion may be leakages in the power steering system. This system involves a range of components, such as the power steering pump and hoses that operate in unison to pump hydraulic fluid to facilitate steering that is fluid, and easy to control. On the other hand, if there is even a small leak in any part of this complicated system, it can result in a slow loss of power steering assistance. Fluid leaks not only affect the operation of the power steering system but are also the major cause for system failure.
3. Steering Gear Issues
The steering gear, or the steering rack, is a important component of the power steering system of a Ford Fusion. Some of the common issues are worn-out gears or damage to the steering rack which causes uneven steering and loss of control over the car. In the case of such steering gear problems, a quick fix is necessary to return to normal functionality and avoid additional problems.
4. Sensor Malfunctions
Sensors play a key role in the power steering system by monitoring steering input and vehicle speed to determine the required amount of assistance. Any inaccuracies or errors in these readings can trigger a fault warning, as sensors provide vital data for the system. If the sensors fail, they cannot send accurate information, which can result in problems within the power steering system.
5. Power Steering Pump Failure
The power steering pump is an important component that generates the hydraulic pressure needed to attain smooth steering in the Ford Fusion. But as time goes on, the pump might wear down and stop working. As for the Power Steering Assist Fault, one of the most common questions that pop up is can we still drive with a power starting assist fault? In most cases, you can still drive with this fault, but it might make steering much harder, requiring a lot more effort.
The timely Fixing steering gear issues not only guarantees safer driving but also stops the growth of problems that may cause a total failure of the power steering system.
How to Fix Ford Fusion Power Steering Assist Faults
1. Check Power Steering Fluid Levels
A common cause of power steering issues in the 2010, 2012 and 2013, 2014, 2015, 2016, 2017 Ford Fusion models is insufficient or contaminated power steering fluid. To fix this problem, start by analyzing the fluid reservoir located under the hood of your car.
First, confirm that you are using the recommended power steering fluid for your model year. If the fluid level appears low, it’s important to add the recommended fluid until it reaches the correct level. Be sure to adhere to the manufacturer’s instructions on the right type of power steering fluid to achieve the best performance.
2. Inspect the Serpentine Belt
The serpentine belt powers the steering system in your Ford Fusion. Power steering problems are caused by loose or damaged belts. Open the hood and check the belt for any wear, cracks, or looseness. If you find any faults, it is recommended to change the belt to bring the power steering system back to the right work.
3. Battery Voltage Check
Sometimes, low battery voltage may cause the power steering assist fault. Make sure your car battery is in good condition and has the right voltage. If the battery is weak or old, consider a replacement. The overall electrical system includes the power steering mechanism is aided by a well-charged and steady battery.
4. Resetting the Power Steering Module
Newer cars such as the Ford Fusion, have electronic power steering systems controlled by modules. A simple fix for power steering assist faults is a reset of the power steering module. This can be achieved by disconnecting the car battery for a few minutes and then reconnecting it. Make sure that you reset the module according to the manufacturer’s instructions.
5. Professional Diagnostics and Repairs
If the above steps fail to correct the power steering assist fault, then it is advisable to consult a technician. A professional mechanic or service technician can conduct a comprehensive diagnosis that utilizes specialized tools and equipment. They can trace the source of the problem and make the required repairs or replacements to bring your Ford Fusion power steering system back to an optimum state.
Conclusion
If your Ford Fusion indicates a Power Steering Assist Fault, the problem is with the power steering system. This system enables you to control your car more efficiently. Several factors can cause the fault; it can be a sensor malfunction, a power steering pump problem, or an electronic component problem. It is important to deal with this issue timely as driving without adequate power steering support makes it harder to steer, which can be dangerous. In case you are wondering how do I reset my electronic power steering? It is suggested to refer to your car’s manual or ask a professional mechanic for help.
Related Posts:
- How To Turn Off Ford MyKey Without Admin Key
- Engine Coolant Over Temperature Ford Fusion
- Ford Rear Belt Monitor Fault
